Earthing
This app is compatible with the DTE-g device and enables users to request Earthing Measures at any time.
Basically the user needs to select the SDSs where he wants to request Earthing measures, and press Start. After that, the corresponding devices will start sending earthing measures to the platform which can be seen in the app’s interface, both on table and on chart, and exported to a CSV file. When desired, the user can Stop the request and turn the selected devices back to the Normal operation mode.
Configuration
This app does not have any device parameters to be configured.
Results
While in the Earthing mode, the device sends the following information to the platform:
- Timestamp: the time of the measurement;
- PEarth-1368Hz: the Protective Earth Resistance for frequency 1368Hz, in Ohm/m;
- PEarth-1611Hz: the Protective Earth Resistance for frequency 1611Hz, in Ohm/m;
- PEarth-1758Hz: the Protective Earth Resistance for frequency 1758Hz, in Ohm/m;
- U-PE-FE: the Earth Voltage Differential (between Protective Earth and Functional Earth);
- Observations: The observations information defined when the mode was started.